Credit Card Wallet
Ducktivity provided by Ilda
This one is for all the shoppers out there!!! I think your just going to love this idea!
If you are anything like me you have a ton of cards taking up precious space in your already crowded wallet! NOT anymore!!!! Just make one of these!
- Skill Level
- Approximate Crafting Time
- Supplies and Tools
zebra pattern duct tape
ATG tape gun
To secure it closed I used a Velcro dot. Easiest way to ensure that the dots line up is to take both top and bottom pieces of Velcro and center it on the inner lid of the wallet, then fold it closed.
Apply double sided tape around the outer edges of the pocket (make sure to go as close to the top and bottom edge as possible, but not the sides... come in about 3mm)
Line it up with the next pocket and adhere them together, ensure it is all lined up and that the opening of the pockets are in the same direction. Repeat until all pockets are glued together.
Next take the scrap card stock, and cut it to 20 x 9.5 cm, then place the edge of the paper or the sticky side of the duct tape.
Next cut a little slit on the duct tape where the paper ends and fold the duct over on to itself.
Then take that same piece of duct tape and adhere it to the paper. Bend over the edge of the duct tape that remains and this will create a nice clean outer edge. Repeat the last step for the other side.
Continue by cover the remaining paper down the middle (ensure you cut a piece long enough to cover the other side as well)
Next glue the pockets to the inside bottom of duct tape layer, making sure to align the top edges.