Directions

Double sided strip of Duck Tape created by folding a piece of tape over itself

Step 1

Make a double sided Duck Tape® strip that is 8 in. long.

15 squares of 3 colors of Duck Tape

Step 2

Make 15 squares of each color Duck Tape® that are 1.5 in. long and 1.5 in. wide. You should have a total of 45 squares.

Squares from the previous step with one corner folded to the middle of the sticky side

Step 3

Take each square, sticky side up, and fold the top right corner over so there is one eighth of an inch of sticky part showing around both edges.

pieces from the previous step with one other corner folded to the center, so that there is a double sided triangle with a sticky rectangle sticking out the bottom

Step 4

Fold the left top corner down so that there is only a little of your sticky side showing on the bottom.

steps 3-4 repeated until all squares are folded

Step 5

Repeat steps 3-4 so you have 45 scallops.

one scallop from the previous step placed in the center of the tip of the strip from step one so that the point of the triangle hangs over the edge

Step 6

Place one of your scallops on the top center of your strip from step 1.

two more scallops placed on either side of the previous step

Step 7

Layer two more scallops on the left and right side of your strip. Create your own pattern with your Duck Tape®. Fold over the excess edges on the back of your bracelet.

strip of Duck Tape placed on the back side

Step 8

Flip the bracelet over and place a small strip of Duck Tape® on the back to clean up your top edge.

Steps 6-7 repeated with alternating colors until the whole bracelet is covered

Step 9

Repeat steps 6-7 until you’ve covered the entire bracelet.